Currencies
Heating tape with constant power output

Heating tape with constant power output

/
Displaying 1 to 18 (of 18 products)
  • IAL8Ex connection set for hazardous areas

    IAL8Ex connection set for hazardous areas

    The IAL8Ex… system is a very easy and fast to install connection kit for connecting power supply cable as well as heating cable, end termination, based on an approved screw connection and approved for all heating tapes in the market. Due to the very compact design, it is possible to mount the parts directly on the surface of the pipe/tank/enclosure underneath the insulation. There is no blow-heater or special skills required for assembling. Further on branches can easily realized with the T-branch. Technical data IAL8 Temperature range:  -60…180°C Sealing range power cable: 7,0 - 10,5mm Sealing range heating cable: thickness.4,7– 6,5;  width: 10-13mm Max. current: 20A AC Voltage: 12…400V AC Terminal cross section: 2,5mm² Protection : IP66 Length of connector/ end: 110mm / 70mm Diameter: 25mm  

    €131.70 including_tax
    Buy Now
    Add To Compare
    Add To Wishlist
  • Quincon connection set (Non Ex)

    Quincon connection set (Non Ex)

     The Quincon system contains a termination set which is easy and fast to assemble, based on approved screw technology. The compact dimensions makes it possible, that this system can be installed even underneath the thermal insulation of the pipe. The IAL5 product range contains several components such as power supply, end termination, branches and connections. The installation is very easy to handle and requires no special tools such as hot air blower.Technical data IAL5 Quincon Max. temperature :                130°C Heating tapes type:              ILL, ILLw, ILL..S,ILM, ILMw, ILH, ILHS, ILSCross section terminals:     2,5 mm² Max. current:                         25ALength connector:               125 mmLength end seal:                 58 mm

  • selflimiting heating tape IPL6 (200°C)

    selflimiting heating tape IPL6 (200°C)

    IPL/IPMM is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPL  (with silicone outer sheath) is approved for use in non-hazardous areas. IPMM  (with fluorpolymer outer sheath) is approved for use in hazardous areas.

  • selflimiting heating tape IPL6 (200°C)

    selflimiting heating tape IPL6 (200°C)

    IPL/IPMM is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPL  (with silicone outer sheath) is approved for use in non-hazardous areas. IPMM  (with fluorpolymer outer sheath) is approved for use in hazardous areas.

  • Silicone non shrinking connection set

    Silicone non shrinking connection set

     The termination kits of the IAL4-series are silicon-made termination parts which contains power supply, end seal, a special cable gland and various accessories. These termination kits can be used to connect the heating circuit directly in an Exe approved junction box e.g. AG.. Ex or thermostat enclosure IRM..Ex. There is no separate supply cable needed. Because of the high temperature resistance up to 200 °C, heating cable types ILL.. are suitable as well as mid- & high temperature heating cable types ILM, IPMM, IPL, IPH, ILH, ILHS and ILS.Technical data IAL4SS/BS Max. ambient temperature:          200°CFor heating tapes type (SS):        ILL,IPMFor heating tapes type(BS):         ILLw,ILM,ILH,ILSLength connector (SS):                160mmLength connector (BS):                165mmLength end seal:                           50mm

  • zone heater  IPH102NF 10 W/m at 230 V (285°C)

    zone heater IPH102NF 10 W/m at 230 V (285°C)

     Quintherm IPH is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. Quintherm IPH is approved for use in hazardous, safe and corrosive environments. Because of the special construction with heating zones no additional cold lead is required. From cut point to the next heating wire bonding point the heating cable remains cold and serves as a cold lead. The installation of IPH heating tape is quick and simple and requires few special skills and tools. Termination and power connection components are provided in convenient kits.

  • zone heater  IPH302NF 30 W/m at 230 V (285°C)

    zone heater IPH302NF 30 W/m at 230 V (285°C)

     Quintherm IPH is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. Quintherm IPH is approved for use in hazardous, safe and corrosive environments. Because of the special construction with heating zones no additional cold lead is required. From cut point to the next heating wire bonding point the heating cable remains cold and serves as a cold lead. The installation of IPH heating tape is quick and simple and requires few special skills and tools. Termination and power connection components are provided in convenient kits.

  • zone heater  IPH302NF 70 W/m at 230 V (285°C)

    zone heater IPH302NF 70 W/m at 230 V (285°C)

     Quintherm IPH is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. Quintherm IPH is approved for use in hazardous, safe and corrosive environments. Because of the special construction with heating zones no additional cold lead is required. From cut point to the next heating wire bonding point the heating cable remains cold and serves as a cold lead. The installation of IPH heating tape is quick and simple and requires few special skills and tools. Termination and power connection components are provided in convenient kits.

  • zone heater  IPH502NF 50 W/m at 230 V (285°C)

    zone heater IPH502NF 50 W/m at 230 V (285°C)

     Quintherm IPH is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. Quintherm IPH is approved for use in hazardous, safe and corrosive environments. Because of the special construction with heating zones no additional cold lead is required. From cut point to the next heating wire bonding point the heating cable remains cold and serves as a cold lead. The installation of IPH heating tape is quick and simple and requires few special skills and tools. Termination and power connection components are provided in convenient kits.

  • zone heater  IPL132CS (200°C)

    zone heater IPL132CS (200°C)

    IPL/IPMM is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPL  (with silicone outer sheath) is approved for use in non-hazardous areas. IPMM  (with fluorpolymer outer sheath) is approved for use in hazardous areas.

  • zone heater  IPL232CS (200°C)

    zone heater IPL232CS (200°C)

    IPL/IPMM is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPL  (with silicone outer sheath) is approved for use in non-hazardous areas. IPMM  (with fluorpolymer outer sheath) is approved for use in hazardous areas. Cross Sell Products

  • zone heater  IPL332CS 33 W/m at 230 V (200°C)

    zone heater IPL332CS 33 W/m at 230 V (200°C)

    IPL/IPMM is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPL  (with silicone outer sheath) is approved for use in non-hazardous areas. IPMM  (with fluorpolymer outer sheath) is approved for use in hazardous areas.  

  • zone heater  IPL502CS 50 W/m at 230 V (200°C)

    zone heater IPL502CS 50 W/m at 230 V (200°C)

    IPL is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPL is approved for use in non-hazardous areas.  

  • zone heater  IPS1002A 100 W/m at 230 V (285°C)

    zone heater IPS1002A 100 W/m at 230 V (285°C)

     IPS is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPS is approved for use in non-hazardous, and hazardous areas to world-wide standards. Because of the special construction with “heating zones? no additional cold lead is needed. From cut point to the next heating wire bonding point the heating cable remains cold and serves as cold lead. The installation of IPS heating tape is quick and simple and requires few special skills or tools. Termination and power connection components are all provided in convenient kits. IPS is jacketted in a continuous aluminium extrusion for maximum mechanical strength, even after severe process upsets.

  • zone heater  IPS1502A 150 W/m at 230 V (285°C)

    zone heater IPS1502A 150 W/m at 230 V (285°C)

      IPS is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPS is approved for use in non-hazardous, and hazardous areas to world-wide standards. Because of the special construction with “heating zones? no additional cold lead is needed. From cut point to the next heating wire bonding point the heating cable remains cold and serves as cold lead. The installation of IPS heating tape is quick and simple and requires few special skills or tools. Termination and power connection components are all provided in convenient kits. IPS is jacketted in a continuous aluminium extrusion for maximum mechanical strength, even after severe process upsets.

  • zone heater  IPS152A 15 W/m at 230 V (285°C)

    zone heater IPS152A 15 W/m at 230 V (285°C)

      IPS is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPS is approved for use in non-hazardous, and hazardous areas to world-wide standards. Because of the special construction with “heating zones? no additional cold lead is needed. From cut point to the next heating wire bonding point the heating cable remains cold and serves as cold lead. The installation of IPS heating tape is quick and simple and requires few special skills or tools. Termination and power connection components are all provided in convenient kits. IPS is jacketted in a continuous aluminium extrusion for maximum mechanical strength, even after severe process upsets.

  • zone heater  IPS302A 30 W/m at 230 V (285°C)

    zone heater IPS302A 30 W/m at 230 V (285°C)

      IPS is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPS is approved for use in non-hazardous, and hazardous areas to world-wide standards. Because of the special construction with “heating zones? no additional cold lead is needed. From cut point to the next heating wire bonding point the heating cable remains cold and serves as cold lead. The installation of IPS heating tape is quick and simple and requires few special skills or tools. Termination and power connection components are all provided in convenient kits. IPS is jacketted in a continuous aluminium extrusion for maximum mechanical strength, even after severe process upsets.

  • zone heater  IPS502A 50 W/m at 230 V (285°C)

    zone heater IPS502A 50 W/m at 230 V (285°C)

      IPS is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels. It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to-length feature or field fabricated heating cable is preferred. IPS is approved for use in non-hazardous, and hazardous areas to world-wide standards. Because of the special construction with “heating zones? no additional cold lead is needed. From cut point to the next heating wire bonding point the heating cable remains cold and serves as cold lead. The installation of IPS heating tape is quick and simple and requires few special skills or tools. Termination and power connection components are all provided in convenient kits. IPS is jacketted in a continuous aluminium extrusion for maximum mechanical strength, even after severe process upsets.

/
Displaying 1 to 18 (of 18 products)