Welcome! Sign in
and see what's new since your last visit.
Here you will see our product portfolio and manufacturing in a company video >>>
The Ex approved emergency luminaries are equipped with modern, light-weight and maintenance-free LED technology. They are supplied with a rechargeable battery which is monitored, tested and carefully charged by the intelligent charging electronics. Further, a version without a battery, powered by a central emergency supply, is available. Areas of application are escape doors, emergency exits, emergency routes and all areas where light is still required after a power failure. The emergency lights are supplied with ready-to-connect cable routing and are therefore to be installed quickly. Up to two line bushings or cable glands are possible. Thus, several emergency lights can also be connected in parallel. We will deliver this Exit lighting with one line bushing with integrated 10m power cable and one M20 blind plug
The Ex approved emergency exit luminaries are equipped with modern, light-weight and maintenance-free LED technology. They are supplied with a rechargeable battery which is monitored, tested and carefully charged by the intelligent charging electronics. Further, a version without a battery, powered by a central emergency supply, is available. Areas of application are escape doors, emergency exits, emergency routes and all areas where light is still required after a power failure. The emergency lights are supplied with ready-to-connect cable routing and are therefore to be installed quickly. Up to two line bushings or cable glands are possible. Thus, several emergency lights can also be connected in parallel. We will deliver this Exit lighting with one line bushing with integrated 10m power cable and one M20 blind plug
The Self-Limiting Heating Plate „Quintherm IH2 250 2 200“ is a new generation of heating plates. This compact heating plate has a uniform heat distribution over the whole surface. By any installation position the heating plate is suitable very well for small cabinets and narrow rooms. Depending on size and output available for Ex-Temperature classes T3 – T6.
The IRM Ex d-Series Temperature Controllers are mechanical 2-point capillary tube type thermostats. The epoxy painted die-cast aluminium enclosure is very robust for harsh environments and can be used for direct connection of heating circuits with approved cable glands. This temperature controller can be used for direct switching by the n/c contact up to 25A. The temperature set point is fully adjustable; the n/c contact opening on temperature rise. Standard colour is cream-white RAL 9010 but other colour finishes are available upon request. Technical Data Min. ambient temperature: -40°C (-55°C on request) Switching capacity: 25A/250V (16A/400V on request) Temperature class: T6 at +55°C IRM040Exd: Temperature Range: 0…+40°CIRM0200Exd: Temperature Range: 0…+200°C IRM50320Exd: Temperature Range: +50…+320°C
The Ex approved signal tower is equipped with latest technology, bright and maintenance free LED-technique. Applications are status indication, fault indication, level indication, access authorisation and traffic lights. There are 2 different sizes of enclosures available. One for up to 4 (430mm) and the other for 5 (470mm) signal lamps. The signal towers are delivered with cable gland or ready installed and connected line bushing. Advantage of the line bushing is a pre-wired and ready-for-connection unit. There are up to 2 cable glands or line bushings possible. So you can easily connect more signal towers in line. Dimension: 430(470)x174x210mmIngress protection: IP66 Cage clamp terminals: 2,5mm² Temperature range: -20°C…+50?C Operationtype: Steady light ; flash lightVoltage: 24V, 110V, 230VLife expectancy: 100.000 h ; > 10 years
These line bushings are customized products and may not be returned or exchanged Technical Data line Radox 125 black, numberedtemperature range -55°C bis 115°C Voltage 600/1000Vlength on both sides 1000mm Configure your individual line bushing: Individual line bushing specification, calculation and order
These line bushings are customized products and may not be returned or exchanged Technical Data line Radox 125 black, numberedtemperature range -55°C bis 115°C 0,25mm2, 0,5mm2 450/750 V 0,75mm2 bis 95mm2 600/1000Vlength on both sides 750mm Configure your individual line bushing: Individual line bushing specification, calculation and order
Quintherm ILS is an industrial grade, self-regulating heating tape that can be used for applications ranging from process heating or maintenance of temperatures up to 200°C. It can be cut to length on site and exact piping lengths can be matched without any complicated design considerations. ILS is approved for use in non-hazardous, hazardous and corrosive environments to world-wide standards. Its self-regulating characteristics improve safety and reliability. ILS will not overheat or burnout, even when overlapped upon itself. Its power output is self-regulated in response to the pipe temperature. The installation of Quintherm ILS is quick and simple and requires no special skills or tools. Termination, splicing and power connection components are all provided in convenient kits.
Copyright © 2018 Quintex Shop
Powered by TomatoCart and our customers
